Dashboard
Courses
Inspection
Marketing
Products and Services

Profile
Settings
Log Out

Quiz

Topic Progress:

← Back to Lesson

Attic and Internal Structure Quiz

Time limit: 0

Quiz Summary

0 of 14 questions completed

Questions:

1
2
3
4
5
6
7
8
9
10
11
12
13
14

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 14 questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10
11
12
13
14

Answered
Review

Question 1 of 14

1. Question
Inspectors are required to inform their clients about the lack of _______ in areas of the home.
- Radon
- Insulation
- Lighting
- Moisture
Correct

Incorrect
Question 2 of 14

2. Question
OSB is an acronym for _______ .
- Outer Styro-Board
- Occupancy Standards Bureau
- Oriented Strand Board
- Outdoor Sub-basement
Correct

Incorrect
Question 3 of 14

3. Question
Purlins should always be installed at a _______ degree angle.
- 60
- 30
- 45
- 90
Correct

Incorrect
Question 4 of 14

4. Question
Batt insulation should always be installed with ______ .
- Paper facing out
- Paper facing in
- Paper facing the warm part of the building
- Paper facing the cold side of the building
Correct

Incorrect
Question 5 of 14

5. Question
It is okay for dryer vents to terminate in the attic?
- True
- False
Correct

Incorrect
Question 6 of 14

6. Question
What’s the minimum clearance for a gas appliance flue pipe in the attic?
- 1 Inch
- 2 Inch
- 5 Inch
- 6 Inch
Correct

Incorrect
Question 7 of 14

7. Question
________ is a sign of previous moisture damage.
- White paint
- Mismatched roof sheathing
- Rusty nails
- All of the above
Correct

Incorrect
Question 8 of 14

8. Question
For appliances installed in the attic of homes there must be a service space that is ________.
- 20 in x 20 in
- 30 in x 30 in
- 50 in x 50 in
- 60 in x 60 in
Correct

Incorrect
Question 9 of 14

9. Question
The attic access hatch should be _________?
- Insulated
- Weather stripped
- Locked
- Both A & B
Correct

Incorrect
Question 10 of 14

10. Question
Rafter ties are required on stick built roofs when the joists are perpendicular to the _________?
- Purlins
- Struts
- Ceiling Joists
- Trusses
Correct

Incorrect
Question 11 of 14

11. Question
Ridge boards should be ________ the rafters?
- Plumb with
- Longer than
- Shorter than
- On top of
Correct

Incorrect
Question 12 of 14

12. Question
Insulation that is ________ will not perform at its listed value?
- Smashed
- Fluffed
- Wet
- All of these
Correct

Incorrect
Question 13 of 14

13. Question
In attics without ridge vents, ventilation is typically required to be 1sq ft, per ____ sq ft of attic space?
- 150
- 175
- 200
- 250
Correct

Incorrect
Question 14 of 14

14. Question
Trusses are usually made using _________ dimension boards?
- 2×4
- 4×4
- 2×6
- 2×8
Correct

Incorrect

← Previous Topic

January 17, 2018
Erica Warfield

© Copyright by Axium Inc. 2016–2018 All rights reserved.